Cisco Systems 78-13983-04 manual MIB Support, MWR 1900 supports the following MIBs, RFC1213-MIB

Chapter 1 Overview of the MWR 1900

Software Features

HSRP

Cisco’s Hot Standby Router Protocol (HSRP) is used to control which router is active and which is standby. HSRP uses a priority scheme to determine which HSRP-configured router is to be the default active router. Priority is determined first by the configured priority value, and then by the IP address. In each case a higher value is of greater priority.

MIB Support

The MWR 1900 supports the following MIBs:
• CISCO-ACCESS-ENVMON-MIB		•	CISCO-TCP-MIB
•	CISCO-CDP-MIB	•	ENTITY-MIB
•	CISCO-CLASS-BASED-QOS-MIB	•	IF-MIB
•	CISCO-CONFIG-COPY-MIB	•	IGMP-MIB
• CISCO-CONFIG-MAN-MIB		•	IPMROUTE-MIB
• CISCO-ENVMON-MIB		•	OLD-CISCO-CHASSIS-MIB
•	CISCO-FLASH-MIB	•	OLD-CISCO-FLASH-MIB
•	CISCO-HSRP-EXT-MIB	•	OLD-CISCO-INTERFACES-MIB
•	CISCO-HSRP-MIB	•	OLD-CISCO-IP-MIB
•	CISCO-ICSUDSU-MIB	• OLD-CISCO-SYSTEM-MIB
•	CISCO-IMAGE-MIB	•	OLD-CISCO-TS-MIB
•	CISCO-IP-STAT-MIB	•	RFC1213-MIB
• CISCO-IPMROUTE-MIB		•	RFC1253-MIB
• CISCO-MEMORY-POOL-MIB		•	RFC1406-MIB
•	CISCO-PROCESS-MIB	•	TCP-MIB
•	CISCO-QUEUE-MIB	•	UDP-MIB

•CISCO-SYSLOG-MIB

The MWR 1900 uses the same software base as the Cisco 10000. As such, it shares the same QoS MIB limitations of the Cisco 10000. For information about the Cisco10000 MIB support, see the Cisco 10000 Series ESR MIB Specifications Guide on CCO at http://www.cisco.com/univercd/cc/td/doc/product/aggr/10000/10kmibs/specgdll/index.htm.

Cisco MWR 1900 Mobile Wireless Edge Router Software Configuration Guide

78-13983-04 1-5