Control panel:
1.Press [Menu] to enter the setting menu.
2.Press [f] or [e] to access the [Display] menu.
3.Press [d]to find[PBP]
4.Press [Enter] to enter the PBP (Picture by Picture) photo selection screen.
5.Press [c] or [d] or [f] or [e] to select the files to be compared.
6.Press [Enter] to activate the image comparison.
7.Press [f] or [e] to move the images (captured images only) leftward/rightward.
8.Press [Menu] again to return to image thumbnails.
9.Press [Source] to exit.
7.16I would like to resume the factory default setting (Factory Reset)
1.Press[Menu]on the remote control or control panel to enter the setting menu
2.Press [f] or [e] to access the [Advance] menu.
3.Press [d] to select [Factory Reset].
4.Press [f] or [e] to select [Yes].
5.Press [Enter] to activate.
7.17I would like to reduce the image noise (Noise Reduction)
This function enables visual presenter to automatically clear image noise. The noise is especially obvious when Visual presenter is connected to a DLP projector. You can use this function to improve the image quality.
English - 34
