7.14I would like to play the slides (Slide Show)

4.Press [f] or [e] to turn to the previous/next video.

5.Press [Source] to exit.

[Note] Only the MOV files recorded can be played and live sound output is not available; additional amplifier can be connected to the PHONE port.

7.13I would like to switch the view between the upper and lower half of the image (Half Page)

1.Press [Half Page] on the remote control or control panel and the upper half of the live image will be displayed.

2.When you press [Half Page] again, the lower half of the live image will be displayed.

3.Press [Half Page] again to exit this function and return to the live image.

<Notes> This function is not available under Microscope Mode. The Zoom in / out function is not available when this function is activated.

7.14I would like to play the slides (Slide Show)

7.14.1Setting the slide show effect

1.Press [Menu] on the remote control or control panel to enter the setting menu.

2.Press [f] or [e] to access the [Storage] menu.

3.Press [d] to find the [Slide Show Effect].

4.Press [f] or [e] to select image switch mode between [Off / Shutter / Right / Down / Side / Open].

5.Press [Menu] to exit.

7.14.2Setting delay time

1.Press [Menu] on the remote control or control panel to enter the setting menu.

2.Press [f] or [e] to access the [Storage] menu.

3.Press [d] to find the [Delay].

4.Press [f] or [e] to select image switch mode between [1 Sec / 3 Sec / 5 Sec / 10 Sec / Manual].

5.Press [Menu] to exit.

English - 32

Page 33
Image 33
Lumens Technology DC260 I would like to play the slides Slide Show, Setting the slide show effect, Setting delay time