Ricoh Aficio AP2700 operating instructions For more information on setting options for

5

Troubleshooting

Status	Possible Causes, Descriptions, and Solutions
Part of the image cannot be	A paper size which is smaller than that specified in the
printed.	application is used for printing. Load the correct size of
	paper. If you can't select the paper size specified in the
	application, make use of the zooming features. See the
	driver's online help file.
Network configurations you	Turn the printer power off and on. The network config-
have made do not become ef-	uration page of the Network Interface Board will be
fective.	printed automatically. Check the configuration of the
	Network Interface Board with this page.
The output from SR720 is	A paper misfeed may have occurred because of curled
curled and a paper misfeed	paper in the output tray. If the paper output is curled,
has occurred with SR720.	remove the paper from the paper tray and load it again
	after turning it over.
Windows 95/98/NT 4.0:	If the connection to the printer is not bi-directional, the
The computer doesn't recog-	computer does not recognize the installed printer op-
nize the installed printer op-	tions.
tions.	Setting of the options might not be specified correctly.
	In this case specify which options you have installed
	using the printer driver.

	Reference
	For more information on setting options for the
	printer driver, see “Installing the PCL5e/6 Printer
	Driver”, “Installing the PostScript Printer Driver” in
	the “Setup Guide”.
Windows 3.1x:	The memory buffer might be full. Remove the check
The printer can not be sent.	mark from the [Use Print Manager] check box, or make
	the timeout setting longer.

Note

❒If the problem cannot be solved, contact your sales or service representative.

68