Ricoh Aficio AP2700 Messages, Description, Resolution, ⇒ P.94 “Job Control Pa, rameters”

Error & Status Messages on the Operation Panel

Messages	Description	Resolution
Remove Paper Standard	The standard output tray is	Remove paper from the
Tray	full.	standard output tray.
		Important
		❒ Remove paper from the
		output tray before it be-
		comes full. If you leave
		paper in the output tray,
		it can cause a paper mis-
		feed.
Replace Maintenance Kit	It is time to replace the	Replace the parts included
	parts included in Mainte-	in Maintenance Kit.
	nance Kit.	After replacing the kit,
		clean the registration roll-
		ers.
Replace PCU	It is time to change Photo	Replace Photo Conductor
	Conductor Unit.	Unit.
Reset Duplex Unit Correct-	AD370 (duplex unit) is not	Set AD370 (duplex unit)
ly	set correctly.	correctly.
Reset Fusing Unit Correct-	There is no fusing unit, or	Install the fusing unit prop-
ly	the fusing unit is not in-	erly. For more information
	stalled properly.	on the fusing unit, see
		"Maintenance Kit Type 270
		Replacement Guide" that
		comes with the mainte-
		nance kit.
Reset PCU Correctly	Photo Conductor Unit is	Set Photo Conductor Unit
	not installed in the printer.	correctly.
Reset Tray 1 Correctly	There is no paper tray, or	Set the tray correctly.
	Tray 1 is not set correctly.
	Note
	❒ This message appears
	only for the default tray.
	⇒ P.94 “Job Control Pa-
	rameters”
Resetting Job...	The job is being reset.	Wait for a while.
Warming Up...	The printer is now prepar-	Wait until the printer is
	ing for printing.	warmed up.

5

61