Ricoh Aficio AP2700 Loading Paper and Other Media, Loading Paper in the Paper Tray

Loading Paper and Other Media

Loading Paper and Other Media

Loading Paper in the Paper Tray

This section describes instructions for loading paper whose size and feed di- rection is already set in the standard paper tray and the optional PS400 or PS440. If you want to change the pa- per size or feed direction, see P.42 “Changing Paper Size of the Paper Tray”.

If you want to load paper in PS420, see P.44 “Loading Paper on PS420 (Pa- per Feed Unit)”. If you want to load pa- per in Bypass Tray Type 270, see P.45 “Loading Paper in Bypass Tray Type 270”.

Important

❒Confirm that the setting of the pa- per size dial matches the paper size and feed direction of the paper in the tray. Otherwise, the paper mis- feed or unexpected result might occur.

Reference

For more information on the size and feed direction of paper that can be loaded in the tray, see P.27 “Paper Types and Sizes”.

ASlide the paper tray out until it stops.

ZAEY012E 4

BAlign all four sides of the paper stack, and load it into the tray.

ZAEY030E

Important

❒Do not stack paper over the lim- it mark.

❒When you set custom size or thick paper in tray 2, do not stack paper above the lower limit mark of tray 2.

Note

❒Set the paper after shuffling through the sheets.

❒Load paper face up onto the tray.

CSlide the tray into the printer un- til it stops.

41