Ricoh Aficio AP2700 Messages, Description, Comments, ⇒ P.94 “Job Control Pa, rameters”

Troubleshooting

5

Messages	Description	Comments
Reset Duplex	AD370 (duplex unit) is not	Set the AD370 (duplex unit)
Unit Correctly	set correctly.	correctly.
Reset Fusing	There is no fusing unit, or	Install the fusing unit prop-
Unit Correctly	the fusing unit is not in-	erly. For more information
	stalled properly.	on the fusing unit, see the
		"Maintenance Kit Type 270
		Replacement Guide" that
		comes with the mainte-
		nance kit.
Resetting Job...	Resetting Print job.	Wait for while.
Reset PCU	There is no Photo Conduc-	Install Photo Conductor
Correctly	tor Unit, or Photo Conduc-	Unit again. For more infor-
	tor Unit is not installed	mation on Photo Conduc-
	properly.	tor Unit, see the "Photo
		Conductor Unit Replace-
		ment Guide" that comes
		with the photo conductor
		unit.
Reset Tray 1	There is no paper tray, or	Set the tray correctly.
Correctly	Tray 1 is not set correctly.
	Note
	❒ This message appears
	only for the default tray.
	⇒ P.94 “Job Control Pa-
	rameters”
Setting Changed	The paper feed unit setting	Configure the paper feed
Cannot Print	has been changed, and the	unit correctly, and try
	proof print failed.	again.
Waiting...	Printer is waiting for the	Wait for a while.
	next data to print.
Warming Up...	The printer is now prepar-	Wait until the printer is
	ing for printing.	warmed up.

Note

❒If you cannot solve the problem by taking the actions listed in the preceding table, turn the power off, and then back on again. If this does not clear the er- ror message, take a note of the contents and number of the error message and contact your sales or service representative.

56