Ricoh Aficio AP2700 Loading Paper in Bypass Tray Type, Load the paper completely into the tray

Loading Paper and Other Media

BLoad the paper completely into the tray.

ZAEY201E

Important

❒Align the paper to the each side completely.

❒Do not stack paper over the lim- it mark.

❒Confirm that the end fence locks completely after loading the right side paper.

❒If you want to change the paper size, contact your sales or ser- vice representative.

Note

❒Shuffle the paper before setting in the tray.

❒Load the paper face up onto the tray.

CSlide the tray into the printer un- til it stops.

Loading Paper in Bypass Tray Type 270

Note

❒Paper sizes supported by the by- pass tray are approximately 90 - 297mm (Metric version) or 3.54 - 11.69" (Inch version) in width, and approximately 148 - 432mm (Met-

ric version) or 5.83 - 17.00" (Inch
version) in length. Set the custom
size to specify with the printer
driver or the operation panel. For	4
more information on using the op-

eration panel, see P.48 “Specifying the Custom Paper Size for the Bypass Tray”.

❒If you load thick paper, OHP trans- parencies or envelopes, set the printer to the “Thick paper” mode using the printer driver.

Limitation

❒The function with using the bypass tray is not available.

•Duplex print

•Sort, Shift Sort

•Staple

•Limitless paper feed

•Proof Print

AOpen the bypass tray.

ZAEY040E

45