Ricoh Aficio AP2700 System 1/2, Default 30 seconds, Default 10 minutes, Default 15 minutes

6

98

Using the Operation Panel

❖ System 1/2

Menu	Description
Print PS Errors	You can specify whether the PS error sheet should be printed.
	•	Off
	•	On

	Note
	❒ Default: Off
I/O Timeout	You can specify how many seconds the printer should wait
	before ending a print job. If data from other ports often ap-
	pear in the middle of your print job, you should increase
	the timeout value.
	15 seconds, 30 seconds, 60 seconds, 180 seconds, 300 seconds

	Note
	❒ Default: 30 seconds
Energy Saver 1	You can specify the length of time the printer should wait
	before switching to Energy Saver mode level 1. This Energy
	Saver mode reduces electric power consumption.
	Off, 1 minute, 3 minutes, 5 minutes, 10 minutes

	Note
	❒ Default: 10 minutes
	❒ If there is an error in your printer, the printer will not
	switch to Energy Saver mode level 1. Power Consump-
	tion is reduced by about 40% compared to the stand by
	mode.
	❒ When the printer switches to Energy Saver mode level 1,
	the Power indicator turns off, the On Line indicator
	stays on, and "Energy Saver 1" is displayed on the panel
	display.
Energy Saver 2	You can specify the time the printer should wait before
	switching to Energy Saver mode level 2. This Energy Saver
	mode reduces electric power consumption.
	Off, 15 minutes, 30 minutes, 1 hour, 2 hours, 3 hours

Note

❒Default: 15 minutes

❒If there is an error in your printer, the printer will not switch to Energy Saver mode level 2. Power Consump- tion is reduced by about 60% compared to the stand by mode.

❒When the printer switches to Energy Saver mode level 2, the Power indicator turns off, the On Line indicator stays on, and "Energy Saver 1" is displayed on the panel display.