Motorola BSR 2000 manual Passive-interface, Default

Release 1.0 RIP Commands

passive-interface

The passive-interfacecommand disables an interface from sending route updates by prohibiting packets from being transmitted from a specified port. When disabled, the subnet continues advertising to other interfaces. The no passive-interfacecommand enables the interface to send route updates.

Group Access

ISP

Command Mode

Router Configuration

Command Line Usage

passive-interface {cable <X/Y> default ethernet <X/Y> gigaether <X/Y> loopback <1-64>}

no passive-interface {cable <X/Y> default ethernet <X/Y> gigaether <X/Y> loopback <1-64>}

Command Syntax

cable X/Y	X is 0. Y is the Cable interface port number.
default	suppresses routing updates on all interfaces
ethernet X/Y	X is 0.	Y is the Ethernet interface port number.
gigaether X/Y	X is 0.	Y is the Gigabit Ethernet interface port
	number.
loopback 1-64	Loopback interface number

526363-001-00 Rev. B MGBI 7-21