BSR 2000 Command Reference Guide

Release 1.0

 

 

logging snmp-trap

The logging snmp-trapcommand logs all SNMP traps or logs SNMP traps of a specified severity level and higher.

Note: The logging snmp-trapcommand limits SNMP trap logging to SNMP traps with a level up to and including the severity level specified with this command.

Group Access

All

Command Mode

Global Configuration

Command Line Usage

logging snmp-trap [alerts critical emergencies errors informational notifications warnings]

no logging snmp-trap [alerts critical emergencies errors informational notifications warnings]

Command Syntax

Severity Levels and Descriptions

emergencies

emergency conditions where the system is unusable -

 

reserved for vendor-specific, fatal hardware or software

 

errors that prevents normal system operation and causes

 

reporting system to reboot (severity level = 0)

alert

conditions where immediate action is needed - a serious

 

failure which causes the reporting system to reboot but is

 

not caused by hardware or software malfunctioning

 

(severity level = 1)

1-82

MGBI

526363-001-00 Rev. B

Page 118
Image 118
Motorola BSR 2000 manual Logging snmp-trap, Not caused by hardware or software malfunctioning