Release 1.0 | BGP Commands |
|
|
network
The network command specifies the list of networks for the BGP routing process. The no network command deletes the entry.
Use the network command to control what networks are originated. be included in the BGP updates. Network types are learned from connected routes, dynamic routing, and static route sources. Because BGP can handle subnetting and supernetting, the mask is used. The maximum number of network commands is based on the configured nvram or ram.
Group Access
ISP
Command Mode
Router Configuration
Command Line Usage
network <A.B.C.D> [mask <A.B.C.D>] no network <A.B.C.D> [mask <A.B.C.D>]
Command Syntax
A.B.C.D | network that BGP will advertise |
A.B.C.D | network or subnetwork mask address |
MGBI |
