Motorola BSR 2000 manual Cable upstream hopping-seed

Release 1.0 CMTS Commands

cable upstream hopping-seed

The cable upstream hopping-seedcommand specifies the 15 bit S-CDMA hopping seed value used for the code hopping sequence initialization.

Note: The logical channel must be disabled to specify a new hopping seed value.

Group Access

MSO

Command Mode

Interface Configuration (cable interface only)

Command Line Usage

cable upstream <X/Y> hopping-seed <0-32767>no cable upstream <X/Y> hopping-seed <0-32767>

Command Syntax

X/Y	the upstream port and logical channel number
	(0-3)
0-32767	the hopping seed value (0 disables code
	hopping)

526363-001-00 Rev. B MGBI 11-81