BSR 2000 Command Reference Guide

Release 1.0

 

 

Entering Service Class Configuration Mode

Service Class Configuration mode provides access to the service class commands described in this section. To enter Service Class Configuration mode, do the following:

1.From Global Configuration mode, enter cable service-classand press the <Enter> key:

MOT(config)# cable service-class <Enter> The command line prompt changes to: MOT(config-srvclass)#

To return to Global Configuration mode:

2.Enter the end or exit press the <Enter> key: MOT(config-srvclass)# end/exit <Enter>

Service Class Command Descriptions

This section contains an alphabetized list and descriptions of the service class commands supported by the BSR.

14-2

MGBI

526363-001-00 Rev. B

Page 926
Image 926
Motorola BSR 2000 manual Service Class Command Descriptions, Entering Service Class Configuration Mode