Motorola BSR 2000 manual Tacacs-server key Word no tacacs-server key

Release 1.0 System Administration Commands

tacacs-server key

The tacacs-server key command is used to specify a global authentication encryption key used for all TACACS+ communications between the TACACS+ client and the TACACS+ server. A global encryption key is used if no encryption key is specifically configured for this TACACS+ server. The no tacacs-server key disables authentication encryption.

Note: The key entered must match the key used on the TACACS+ server. All leading spaces are ignored; spaces within and at the end of the key are not. If spaces are used within the key, the key should not be enclosed in quotation marks unless the quotation marks themselves are part of the key.

Group Access

All

Command Mode

Global Configuration

Command Line Usage

tacacs-server key <WORD> no tacacs-server key

Command Syntax

WORD	specifies an authentication and encryption
	key - this key must match the key used by the
	TACACS+ server

526363-001-00 Rev. B MGBI 1-155