Motorola BSR 2000 manual Cable upstream spectrum-group

Release 1.0 CMTS Commands

cable upstream spectrum-group

The cable upstream spectrum-group command is used to apply a spectrum group to an upstream port. The no cable upstream spectrum-group command removes the spectrum group.

Group Access

MSO

Command Mode

Interface Configuration (cable interface only)

Command Line Usage

cable upstream <NUM> spectrum-group <WORD> no cable upstream <NUM> spectrum-group <WORD>

Command Syntax

NUM	Upstream port number
WORD	The exact group name applied to the upstream
	port.

526363-001-00 Rev. B MGBI 11-105