Motorola BSR 2000 manual Ip dhcp relay information option

BSR 2000 Command Reference Guide Release 1.0

ip dhcp relay information option

The IP DHCP relay function is used only when multiple subnetworks are configured on the same cable interface. The IP DHCP relay function gathers broadcast DHCP MAC discovery packets from a DHCP host, such as a CM or Customer Premises Equipment (CPE), and redirect the packets to their corresponding DHCP server or DHCP server profile if there is only one DHCP server. The DHCP server assigns an IP address to the CM or CPE that requested the IP address.

Use the ip dhcp relay information option command to enable the DHCP option-82 relay-agent on the cable interface. Use the no ip dhcp relay information option command to disable the DHCP option-82 relay-agent on the cable interface.

Group Access

ISP

Command Mode

Interface Configuration

Command Line Usage

ip dhcp relay information option no ip dhcp relay information option

Command Default

DHCP option-82 disabled

11-152 MGBI 526363-001-00 Rev. B