Release 1.0 | CMTS Commands |
|
|
show interfaces cable downstream
The show interfaces cable downstream command displays the following downstream cable information:
cable | downstream cable location |
upstream up/ | downstream interface administrative status |
administratively down |
|
packets output | number of packets transmitted from the |
| interface |
bytes | number of bytes transmitted from the |
| interface |
discarded | number of packets discarded |
total active modems | total active cable modems on this downstream |
| channel |
Spectrum Group | the associated upstream Spectrum Group |
| names |
The following is an example of typical screen output from the show interfaces cable downstream command:
Cable 3/0: Downstream 0 is administratively down 0 packet output, 0 bytes, 0 discarded
0 total active modems Spectrum Group: N/A
Group Access
All
Command Mode
All modes except User EXEC
Command Line Usage
show interfaces cable <X/Y> downstream
show interfaces cable <X/Y> downstream
MGBI |
