
Release 1.0 | RIP Commands |
|
|
invalid | interval in seconds, routing updates |
| |
| Interval of time (in seconds) after which a |
| route is declared invalid; it should be at least |
| three times the value of the update argument. |
| A route becomes invalid when there is an |
| absence of updates that refresh the route. The |
| route then enters into a holddown state. The |
| route is marked inaccessible and advertised as |
| unreachable. However, the route is still used |
| for forwarding packets. |
flush | number of seconds used before route removed |
| from routing |
| |
| Amount of time (in seconds) that must pass |
| before the route is removed from the routing |
| table; the interval specified should be greater |
| than the value of the invalid argument. If it is |
| less than this sum, the proper holddown |
| interval cannot elapse, which results in a new |
| route being accepted before the holddown |
| interval expires. |
Command Default
update = 30 seconds invalid = 180 seconds flush = 300 seconds
MGBI |