Release 1.0 | CMTS Commands |
|
|
show cable qos profile
The show cable qos profile command displays the following information for all QoS Profiles or a selected user configurable QoS Profile:
Note: This command is only valid for DOCSIS 1.0, DOCSIS 1.0+, and
Euro-DOCSIS 1.0 cable modems.
Prof Idx | the QoS Profile identifying number |
Pri | the relative priority number assigned to |
| upstream traffic by this QoS profile with 7 |
| being the highest priority. |
Max UP BW | the maximum upstream bandwidth |
Guar UP BW | the guaranteed minimum upstream bandwidth |
Max DOWN BW | the maximum downstream bandwidth. |
Max tx burst | the maximum transmit burst size in bytes - |
| valid range is from 0 (the default) to the |
| largest |
BPI Mode | "true" indicates that Baseline Privacy is |
| enabled for this QoS profile - "false" indicates |
| that Baseline Privacy is not enabled for this |
| Qos profile |
Flow Count | the number of cable modems that have |
| registered using this QoS Profile - active Qos |
| Profiles are those with Flow Count = 0 |
Tos Mask | overwrites the Type of Service (TOS) field in |
| IP datagrams received on the upstream before |
| forwarding them downstream if the value is |
| not "0" |
MGBI |
