Release 1.0

CMTS Commands

 

 

Command Line Usage

cable upstream <NUM> power-level default {<-150 - +150>} no cable upstream <NUM> power-level default {<-150 - +150>}

Command Syntax

NUM

Upstream port number

-150 - +150

The number of dB above or below the default

 

input power level.

Command Default

0 dB

Command Example

The following example shows how to use the cable upstream power-level default command to set the input power level for a 3.2 MHz channel in relative mode from

+11 dBmV to +5 dBmV:

MOT(config-if)#cable upstream 0 power-level default -60

The default input power level is reduced by 6 dB. The power level is now +5 dBmV.

The following example shows how to use the cable upstream power-level default command to set the input power level for a 3.2 MHz channel in relative mode from

+11 dBmV to 0 dBmV, as shown below:

MOT(config-if)#cable upstream 0 power-level default -110

The default input power level is reduced by 11 dB.

526363-001-00 Rev. B

MGBI

11-97

Page 643
Image 643
Motorola BSR 2000 manual MOTconfig-if#cable upstream 0 power-level default