Motorola BSR 2000 manual Summary-address

Release 1.0 OSPF Commands

summary-address

The summary-addressaggregates external routes at the border of the OSPF domain. The no summary-addresscommand deletes aggregated external routes at the border of the OSPF domain.

Use the summary-addresscommand to summarize routes from other routing protocols that are redistributed to OSPF. The area range command summarizes routes between OSPF areas.

The summary address command is responsible for an OSPF autonomous system boundary router to advertise one external route as an aggregate. This applies to all redistributed routes that the address covers.

Group Access

ISP

Command Mode

Router Configuration

Command Line Usage

summary-address<A.B.C.D> <A.B.C.D> [tag <0-4294967295>]no summary-address<A.B.C.D> <A.B.C.D> [tag <0-4294967295>]

Command Syntax

A.B.C.D	summary address of range of addresses
A.B.C.D	IP subnet mask for the summary route
tag 0-4294967295	tag value, can be used as a match value to
	control redistribution

Command Default

All redistributed routes advertised separately

526363-001-00 Rev. B MGBI 8-45