Motorola BSR 2000 manual Show arp, Turns on output modifiers filters, Specified string

BSR 2000 Command Reference Guide Release 1.0

show arp

The show arp command displays static and dynamic entries in the ARP table. The following is typical screen output from the show arp command:

Protocol	Address	Age(min)	Hardware Address	Type	Interface
Internet	10.10.10.10	-	0030.b801.c5f4	ARPA	ethernet 0/0
Internet	10.255.4.1	-	0000.0000.0004	ARPA
Internet	10.255.5.1	-	0000.0000.0005	ARPA
Internet	10.255.6.1	-	0000.0000.0006	ARPA
Internet	10.255.7.1	-	0000.0000.0007	ARPA
Internet	150.31.60.1	41	00e0.6367.99b1	ARPA	ethernet 0/0
Internet	150.31.60.10	-	0030.b801.c570	ARPA	ethernet 0/0
Internet	150.31.60.99	-	0000.0000.9999	ARPA	ethernet 0/0
Internet	150.31.61.23	21	0008.0ee4.84e8	ARPA	cable 0/0
Internet	150.31.61.27	31	0008.0ee4.d550	ARPA	cable 0/0
Internet	150.31.61.28	3	0020.4026.77c0	ARPA	cable 0/0
Internet	150.31.61.29	3	0020.4027.a028	ARPA	cable 0/0
Internet	150.31.61.34	3	0020.4026.d5dc	ARPA	cable 0/0
Internet	150.31.61.37	3	0020.4026.77bc	ARPA	cable 0/0
Internet	150.31.61.80	3	0020.4029.19dc	ARPA	cable 0/0
Internet	150.31.61.81	3	0020.4027.a038	ARPA	cable 0/0

Group Access

All

Command Mode

All modes except User EXEC

Command Line Usage

show arp [ {begin exclude include} {<WORD>} [ {count count-only}]]show arp [ {count count-only}]

Command Syntax

	turns on output modifiers (filters)
begin	filter for output that begins with the
	specified string

2-42 MGBI 526363-001-00 Rev. B