Motorola BSR 2000 Command Default Command Example, MOTconfig-if#cable upstream 0 power-level

Release 1.0 CMTS Commands

Group Access

MSO

Command Mode

Interface Configuration (cable interface only)

Command Line Usage

cable upstream <NUM> power-level <-160 - +290> no cable upstream <NUM> power-level <-160 - +290>

Command Syntax

NUM	Upstream port number
-160 - +290	The input power level, expressed in tenths of a dB.

Command Default

0 dB

Command Example

The following example shows how to use the cable upstream power-levelcommand to set the upstream input power level to +5 dBmV in absolute mode, which keeps the input power level at +5 dBmV regardless of the upstream channel bandwidth setting, as shown below:

MOT(config-if)#cable upstream 0 power-level 50

526363-001-00 Rev. B MGBI 11-95