Motorola BSR 2000 manual Dqos t0-timer/t1-timer, Dqos t0-timer t1-timer1-3600, T0-timer, T1-timer

Release 1.0 PacketCable Commands

dqos t0-timer/t1-timer

If T0 and T1 timeouts are being counted in the show packet-cable statistics gate command output, the network and the PDP server need to be examined. T0 and T1 timers may need to be increased from their default values to avoid T0 and T1 timeouts.

The dqos t0-timerand dqos t1-timercommands configure the T0 and T1 timers. The T0 timer specifies the period of time that a gate is allocated without being authorized. The T1 timer specifies the time that can elapse between the authorization and commit. The no dqos t0-timerand no dqos t1-timercommands restore the default values.

Group Access

All

Command Mode

PacketCable Configuration

Command Line Usage

dqos {t0-timer t1-timer}<1-3600>

Command Syntax

t0-timer	time, in seconds, that a gate ID can remain
	allocated without any specified gate
	parameters
t1-timer	time, in seconds, that an authorization for a
	gate can remain valid
1-3600	number of seconds

Command Default

t0-timer = 30 seconds

t1-timer = 250 seconds

526363-001-00 Rev. B MGBI 16-23