BSR 2000 Command Reference Guide | Release 1.0 |
|
|
show cable downstream
The show cable downstream command displays the following downstream cable information:
ifIndex | interface index |
annex | the downstream MPEG framing format |
frequency | radio frequency carrier center frequency |
rfModulation | radio frequency enabled |
interleaveDepth | depth of interleaving to provide protection |
| from noise |
qamMode | downstream modulation type |
channelWidth | radio frequency channel width |
powerLevel | downstream transmit power level in units of |
| whole dB to one decimal place |
Reserved BW | the amount of reserved downstream |
| bandwidth configured |
Spectrum Group | the associated Spectrum Group names |
The following is an example of typical screen output from the show cable downstream command:
ifIndex: | 98305 |
description: |
|
annex: | B |
frequency: | 327000000 |
rfModulation: | true |
interleaveDepth: | 32 |
qamMode: | 256 |
channelWidth: | 6000000 |
powerLevel: | 600 (10th of dB) |
Spectrum Group: |
|
MGBI |