
Release 1.0 | OSPF Commands |
|
|
area range
Use the area range command to consolidate routes for an Area Border Router (ABR) only by advertising a single summary route that is advertised for each address range that is external to the area. The no area range command removes summarized routes for the ABR.
Group Access
ISP
Command Mode
Router Configuration
Command Line Usage
area
no area
no area
Command Syntax
OSPF area ID number in decimal format. | |
A.B.C.D | OSPF area ID in IP address format |
A.B.C.D | IP address to match. |
A.B.C.D | Subnet mask. |
advertise | Sets address range status to advertise, |
| generates a Type 3 summary LSA. |
| Sets address range status to DoNotAdvertise, |
| Type 3 summary LSA is suppressed, and the |
| component networks remain hidden from |
| other networks. |
MGBI |