Motorola BSR 2000 manual Cable downstream power-level

Release 1.0 CMTS Commands

cable downstream power-level

The cable downstream power-levelcommand sets the power level of a downstream channel. The no cable downstream power-levelchanges the power level setting of a downstream channel to the default.

Use the cable downstream power-levelcommand to set the absolute power level in tenths of dBmV. Use cable downstream power-leveldefault setting to set the receive power based on the automatic calculation of the necessary power level.

Group Access

MSO

Command Mode

Interface Configuration (cable interface only)

Command Line Usage

cable downstream [<0-0>]power-level <450-630>no cable downstream [<0-0>]power-level <450-630>

Command Syntax

0-0	Downstream port number.
450-630	An integer between 450 and 630; unit is in
	tenth-dBmV.

Command Default

550 dBmV

526363-001-00 Rev. B MGBI 11-15