Release 1.0 | IP Commands |
|
|
mac | display MAC layer (layer 2) |
| information for all cable modems on |
| this specific CMTS module |
upstream | display information for an upstream |
| port including the upstream |
| modulation type, channel width, |
| frequency, and modulation profile |
| information (i.e minislots, interleave, |
| preamble, etc.) |
turns on output modifiers (filters) | |
begin | filter for output that begins with the |
| specified string |
exclude | filter for output that excludes the |
| specified string |
include | filter for output that includes the |
| specified string |
WORD | the specified string |
count | count the number of outputted lines |
| count the number of lines while |
| suppressing screen output |
ethernet X/Y | display Ethernet interface controller |
| information for the entire BSR |
| chassis or the optional, specified port |
| number (X is 0. Y is the port number.) |
gigaether X/Y | display Gigabit Ethernet interface |
| controller information for the entire |
| BSR chassis or the optional, |
| specified port number (X is 0. Y is |
| the port number.) |
MGBI |
