Release 1.0 | System Administration Commands |
|
|
duplex
The duplex command configures an Ethernet interface for duplex mode (full or half) and enables/disables
Group Access
ISP
Command Mode
Interface Configuration (Ethernet interface only)
Command Line Usage
duplex {half full auto} no duplex {half full auto}
Command Syntax
half | configures the interface for |
| operation. |
| interface to send and receive signals, but not |
| at the same time. |
full | configures the interface for |
| operation. |
| interface to send and receive signals at the |
| same time. |
auto | configures the interface to auto negotiate its |
| operational mode (either |
| |
| physically connected. |
Command Default
Auto negotiation enabled
MGBI |
