Motorola BSR 2000 manual Differential-encoding on no differential-encoding on

BSR 2000 Command Reference Guide Release 1.0

differential-encoding on

The differential-encoding on command specifies whether or not differential encoding is used in this modulation profile. Differential encoding is a technique where data is transmitted according to the phase change between two modulation symbols instead of by the absolute phase of a symbol. Differential encoding makes the absolute phase of the received signal insignificant and has the effect of doubling the BER for the same C/N. The no differential-encoding on command disables differential encoding for this modulation profile.

Note: Differential encoding is applicable only to TDMA bursts that use QPSK or 16QAM modulation.

Group Access

MSO

Command Mode

Modulation Profile Configuration

Command Line Usage

differential-encoding on no differential-encoding on

11-126 MGBI 526363-001-00 Rev. B