BSR 2000 Command Reference Guide

Release 1.0

 

 

cops status-trap-enable

The cops status-trap-enablecommand enables or disables the COPS status SNMP trap through the DQoSCopsTrap SNMP MIB object. If the COPS status SNMP trap is enabled, the BSR generates an SNMP trap when one or more of the following conditions are occur:

a keep alive timeout

the COPS connection is disconnected a failure to establish a TCP connection a COPS connection is established

an unauthorized PDP attempt to establish a COPS connection

Group Access

All

Command Mode

PacketCable Configuration

Command Line Usage

cops status-trap-enable {disable enable}

Command Syntax

disable

disables COPS status SNMP trap (if

 

previously enabled).

enable

enables COPS status SNMP trap. The default

 

is disabled.

Command Default

Disabled

16-14

MGBI

526363-001-00 Rev. B

Page 990
Image 990
Motorola BSR 2000 manual Cops status-trap-enable disable enable