Motorola BSR 2000 manual Cable insert-interval 0-200 no cable insert-interval

BSR 2000 Command Reference Guide Release 1.0

cable insert-interval

The cable insert-intervalcommand sets the interval at which Initial Maintenance intervals are scheduled in the upstream.These intervals are used by cable modems to send ranging request messages when attempting to join the network. The no cable insert-intervalcommand is used to set the default insertion interval.

Note: Ensure that the upstream port is down before setting the insertion interval.

Group Access

MSO

Command Mode

Interface Configuration (cable interface only)

Command Line Usage

cable insert-interval <0-200> no cable insert-interval <0-200>

Command Syntax

0-200 The insert interval in hundredths of a second.

Command Default

The default insertion interval is 20 hundredths of a second.

11-36 MGBI 526363-001-00 Rev. B