BSR 2000 Command Reference Guide

Release 1.0

 

 

cable upstream force-frag

The cable upstream force-fragcommand is used as a traffic shaping tool that forces the CM to fragment large upstream packets. When a CM sends a request to the CMTS for a large data grant that exceeds the configured minislot threshold, the CMTS grants the CM the configured minislot threshold, which forces the CM to make another data grant request for the remaining data, thereby causing data packets in the original grant to be fragmented by the CM.

Group Access

MSO

Command Mode

Interface Configuration (cable interface only)

Command Line Usage

cable upstream <NUM> force-frag <0-255>no cable upstream <NUM> force-frag <0-255>

Command Syntax

NUM

Upstream port number

0-255

Configured minislot threshold without

 

fragmentation for large data grants from 0 to

 

255.

Command Default

The force fragmentation feature is set to 0 for no forced fragmentation of large data grants.

11-78

MGBI

526363-001-00 Rev. B

Page 624
Image 624
Motorola BSR 2000 manual Cable upstream force-frag