Motorola BSR 2000 manual Max-burst 0-255no max-burst

BSR 2000 Command Reference Guide Release 1.0

max-burst

The max-burstcommand is used to specify the maximum burst length in minislots. The maximum burst length is used to determine the breakpoint between packets that use the short data grant burst profile and packets that use the long data grant burst profile. If the required upstream time to transmit a packet is greater than this value, the long data grant burst profile is used. If the time is less than or equal to this value, the short data grant burst profile is used.

Group Access

MSO

Command Mode

Modulation Profile Configuration

Command Line Usage

max-burst <0-255>no max-burst <0-255>

Command Syntax

0-255 the maximum burst value in minislots

11-156 MGBI 526363-001-00 Rev. B