
Release 1.0 | IP Commands |
|
|
show ip route
The show ip route command displays the active entries in the routing table.
Note: The information displayed reflects the routes that the routing table has exported in the routing protocol that were filtered by that protocol’s export routing policy statements.
Group Access
All
Command Mode
Privileged EXEC and Global Configuration
Command Line Usage
show ip route [<A.B.C.D> [<A.B.C.D>
show ip route [<A.B.C.D> [<A.B.C.D>
Command Syntax
A.B.C.D | Displays route for an IP address. |
A.B.C.D | Enter the subnet mask for the specified IP |
| address to filter routes from a specific |
| subnetwork. |
| Display routes matching the specified |
| Network/Mask pair only. |
bgp | Displays Border Gateway Protocol routes. |
connected | Displays connected routes. |
hostname | Displays routes for the internet hostname. |
ospf | Displays OSPF routes. |
MGBI |