Motorola BSR 2000 manual Neighbor peer-group assigning members

Release 1.0 BGP Commands

neighbor peer-group (assigning members)

The neighbor peer-group(assigning members) command configures a BGP neighbor to be a member a BGP peer group. The no neighbor peer-group(assigning members) command removes the neighbor from the peer group.

The neighbor peer-groupcreates a new member of a peer-group. If there is no such peer, it will be created and assigned to the group. If there is such peer already, and it does not belong to any other group, it will be assigned to the group and inherit its AS number and all its policies. If an existing peer belongs to another group, it must be removed from that group first with no neighbor peer-groupcommand.

The neighbor at the IP address specified completes all of the configuration options of the peer group.

Group Access

ISP

Command Mode

Router Configuration

Command Line Usage

neighbor <A.B.C.D> peer-group <WORD> no neighbor <A.B.C.D> peer-group <WORD>

Command Syntax

A.B.C.D	address of the BGP neighbor
WORD	the name of the peer-group

526363-001-00 Rev. B MGBI 12-39