BSR 2000 Command Reference Guide

Release 1.0

 

 

grants-per-interval

The grants-per-intervalcommand specifies the number of data grants per grant interval. The no grants-per-intervalcommand restores the default value.

Note: Specifying the number of data grants per grant interval is only relevant for service flows using Unsolicited Grant Service (UGS )or Unsolicited Grant Service with Activity Detection (UGS-AD) scheduling:

for UGS, the value of this parameter indicates the actual number of data grants per Nominal Grant Interval

for UGS-AD, the value of this parameter indicates the maximum number of Active Grants per Nominal Grant Interval

Group Access

All

Command Mode

Service Class Configuration

Command Line Usage

grants-per-interval <WORD> <0-127>no grants-per-interval <WORD> <0-127>

Command Syntax

WORD

the user-defined service class name created

 

with the name command

0-127

the number of grants

Command Default

1

14-14

MGBI

526363-001-00 Rev. B

Page 938
Image 938
Motorola BSR 2000 manual Grants-per-interval Word 0-127no grants-per-interval Word