Motorola BSR 2000 manual Area nssa, No-redistribution, No-summary

BSR 2000 Command Reference Guide Release 1.0

area nssa

Use the area nssa command to configure an area as a Not So Stubby Area (NSSA). The no nssa command removes the NSSA configuration of an area.

Group Access

ISP

Command Mode

Router Configuration

Command Line Usage

area {<0-4294967295> <A.B.C.D>} nssa [default-information-originate][no-redistribution][no-summary]

no area {<0-4294967295> <A.B.C.D>} nssa [default-information-originate][no-redistribution][no-summary]

no area {<0-4294967295> <A.B.C.D>}

Command Syntax

0-4294967295	OSPF area ID number in decimal format.
A.B.C.D	OSPF area ID in IP address format

default-information-originateOriginates a Type 7 default into the NSSA

	area on an NSSA Area Border Router (ABR)
	only.
no-redistribution	When router is NSSA ABR, the redistribute
	command imports routes into normal areas,
	but not into the NSSA area.
no-summary	Does not send summary LSAs into NSSA.

Command Default

No NSSA area is defined.

8-4 MGBI 526363-001-00 Rev. B