Motorola BSR 2000 manual Cops client-timer 1-3600000no cops client-timer

Release 1.0 PacketCable Commands

cops client-timer

If the show packet-cable statistics gate command output for the Client-Open Sent field in the COPS Statistics section is incrementing, the network and the PDP server need to be examined to determine the reason for the COPS Client timeouts. The COPS Client Timer (which is the response timer for sending the COPS Client-Open message) can be specified if COPS connections time out before receiving a Client-Accept message.

The cops client-timercommand specifies the time permitted for the BSR to receive the Client-Accept message from the PDP before terminating the COPS connection. The no cops client-timercommand restores the default setting.

Group Access

All

Command Mode

PacketCable Configuration

Command Line Usage

cops client-timer <1-3600000>no cops client-timer <1-3600000>

Command Syntax

1-3600000 COPS Client timer value in milliseconds

Command Default

3000 milliseconds

526363-001-00 Rev. B MGBI 16-11