Motorola BSR 2000 manual Snmp-server engineID, Remote, Udp-port

BSR 2000 Command Reference Guide Release 1.0

snmp-server engineID

The snmp-server engineID command specifies an identification name (ID) for a local or remote SNMPv3 engine. The no snmp-server engineID command returns the local agent engineID to the default, or deletes a remote engineID from the agent.

Note: A local SNMP Engine ID must be configured to use SNMPv3.The SNMP agent is configured with a default Engine ID equal to the MAC address of the chassis.

Group Access

System Administrator

Command Mode

Global Configuration

Command Line Usage

snmp-server engineID {local <HEX>} {remote <A.B.C.D> [udp-port <0-65535>] <HEX>}

no snmp-server engineID {local <HEX>} {remote <A.B.C.D> [udp-port <0-65535>] <HEX>}

Command Syntax

local	sets local engine identification
HEX	engine ID octet string
remote	change or add remote engine id parameters
A.B.C.D	IP address of remote SNMP notification host
udp-port	configures a remote engine-ID
0-65535	UDP port number

3-22 MGBI 526363-001-00 Rev. B