Motorola BSR 2000 manual Ip tftp source-interface loopback

BSR 2000 Command Reference Guide Release 1.0

ip tftp source-interface loopback

The ip tftp source-interface loopback command allows an operator to control the source IP address of TFTP packets generated by the BSR by specifying a loopback interface as the source IP address for TFTP packets. The normal convention for generated TFTP packets is to set the source IP address equal to the IP address of the outgoing interface. The ip tftp source-interface loopback command overrides this convention and instead uses the IP address of the specified loopback interface. The no ip tftp source-interface loopback command removes the loopback source interface.

Note: Before using the ip tftp source-interface loopback command, the loopback interface must be configured and assigned an IP address.

Group Access

System Administrator

Command Mode

Global Configuration

Command Line Usage

ip tftp source-interface loopback <1-64>no ip tftp source-interface loopback

Command Syntax

1-64 the loopback interface number

1-56 MGBI 526363-001-00 Rev. B