BSR 2000 Command Reference Guide

Release 1.0

 

 

cable upstream maintain-power-density on

The cable upstream maintain-power-density on command enables the Maintain Power Spectral Density feature for each logical channel. If Maintain Power Spectral Density is enabled and the modulation rate is different from the previous UCD, the cable modem must change its transmit power level to keep the power spectral density as close as possible to what it was prior to the modulation rate change. The no cable upstream maintain-power-density on command disables the Maintain Power Spectral Density feature. If Maintain Power Spectral Density is disabled, the cable modem maintains the same power level that it was using prior to the modulation rate change.

Group Access

MSO

Command Mode

Interface Configuration (cable interface only)

Command Line Usage

cable upstream <X/Y> maintain-power-density on no cable upstream <X/Y> maintain-power-density on

Command Syntax

X/Y

the upstream port and logical channel number

 

(0-3)

11-86

MGBI

526363-001-00 Rev. B

Page 632
Image 632
Motorola BSR 2000 manual Cable upstream maintain-power-density on