Motorola BSR 2000 manual StopAtThres, Unconstrained

Release 1.0	System Administration Commands
stopAtThres	causes trap transmission SYSLOG messages
	to cease at the threshold specified with the
	logging rate-limitcommand - transmission
	will not resume until the logging
	admin-statuscommand is reset to an option
	other than "stopAtThres" or the threshold is
	set to a higher value
unconstrained	causes all traps and SYSLOG messages to be
	transmitted - if a threshold has been specified
	with the logging rate-limitcommand, a
	warning message will be displayed

526363-001-00 Rev. B MGBI 1-61