Release 1.0

CMTS Commands

 

 

cable downstream rate-limit

The cable downstream rate-limitcommand controls whether rate limiting is applied to downstream traffic on a given downstream interface. The no cable upstream rate-limitcommand disables downstream rate limiting. The token-bucket algorithm is used for rate limiting.

Note: If the rate-limit is enabled, downstream traffic is rate-limited according to the cable modems configured. Packets may be buffered at times when any cable modem or the hosts behind the cable modems transmit data exceeding the permitted bandwidth.

Group Access

MSO

Command Mode

Interface Configuration

Command Line Usage

cable downstream <NUM> rate-limit no cable downstream <NUM> rate-limit

Command Syntax

NUM

the downstream port number

Command Default

Disabled

526363-001-00 Rev. B

MGBI

11-17

Page 563
Image 563
Motorola BSR 2000 manual Cable downstream rate-limit