BSR 2000 Command Reference Guide | Release 1.0 |
|
|
show interfaces cable upstream
The show interfaces cable upstream command displays the following upstream cable interface information:
Cable | upstream cable location |
Upstream up/ | upstream interface administrative status |
administratively down |
|
Received broadcasts | upstream interface broadcast packets received |
Received multicasts | upstream interface multicast packets received |
Received unicasts | upstream interface unicast packets received |
discarded | upstream interface discarded packets |
errors | total errors preventing upstream transmission |
| of packets |
unknown protocol | packets received that were generated using a |
| protocol unknown to the BSR 2000 |
Avg upstream channel | the average percentage of upstream channel |
utilization | utilization |
packets input | total packets received through the upstream |
| interface with no errors |
Total Modems On This | active or inactive cable modems on this |
Upstream Channel | upstream channel |
Spectrum Group | the associated Spectrum Group name |
The following is an example of typical screen output from the show interfaces cable upstream command:
MGBI |