Motorola BSR 2000 manual Cable upstream map-interval

Release 1.0 CMTS Commands

cable upstream map-interval

The cable upstream map-intervalcommand is used to determine the time interval in microseconds for bandwidth maps messages (MAP) to be used by the CM to allocate upstream time slots. The no cable upstream map-intervalcommand resets the upstream interval to the default.

Group Access

MSO

Command Mode

Interface Configuration (cable interface only)

Command Line Usage

cable upstream <NUM> map-interval <2000-16000>no cable upstream <NUM> map-interval <2000-16000>

Command Syntax

NUM	Upstream port number
2000-16000	Interval value in microseconds.

Command Default

4000 microseconds

526363-001-00 Rev. B MGBI 11-87