Release 1.0 | CMTS Commands |
|
|
show interfaces cable
The show interfaces cable command displays the following cable interface information:
cable port up/ | cable modem active or taken down by |
administratively down | administrator |
up/administratively | determines if software processes handling |
down | lineup/protocol down interface is operational |
| or taken down by the administrator |
hardware | hardware type and address |
internet address | internet address then subnet mask |
MTU | interface maximum transmission unit (MTU) |
BW | bandwidth (BW) in kilobits per second |
received broadcast | total number of broadcast or multicast packets |
| that interface receives |
cable | downstream interface location |
downstream up/ | interface administrative state |
administratively down |
|
packets output | number of packets transmitted from the |
| interface |
bytes | number of bytes transmitted from the |
| interface |
discarded | number of packets discarded |
output errors | errors that prevented downstream |
| transmission of packets from the interface |
cable | upstream cable location |
upstream up/ | upstream interface administrative status |
administratively down |
|
received broadcasts | upstream interface broadcast packets received |
MGBI |
