BSR 2000 Command Reference Guide

Release 1.0

 

 

arp timeout

The ARP timeout feature is used to prevent unnecessary flooding of traffic over the cable network. ARP resolution requests are terminated after a defined interval when attempts to resolve addressing information, for a device entry in the ARP cache table.

The ARP cache table expiration value is disabled by default. The arp timeout command configures the amount of time an entry stays in the ARP cache. The no arp timeout command restores the default ARP timeout condition. The show interfaces command displays the current ARP timeout value.

Note: When the arp timeout value is changed, the change affects all the existing entries in addition to the entries subsequently created.

Group Access

ISP

Command Mode

Interface Configuration

Command Line Usage

arp timeout <4-6000>no arp timeout <4-6000>

Command Syntax

4-6000

The expiration value in minutes for the

 

amount of time an entry is allowed to stay in

 

the ARP cache

Command Default

60 minutes

2-4

MGBI

526363-001-00 Rev. B

Page 208
Image 208
Motorola BSR 2000 manual Arp timeout 4-6000no arp timeout