BSR 2000 Command Reference Guide

Release 1.0

 

 

ip proxy-arp

The ip proxy-arpcommand enables proxy ARP on the interface. The no ip proxy-arpcommand disables proxy ARP on an interface.

Note: If a host in the local network is incapable of responding to an ARP request for some reason, the router will respond on behalf of the host when proxy arp is enabled and the IP-to-MAC address mapping of the host is stored in the router with a static arp command, with the alias option specified.

To verify ARP status, use the show running-configcommand.

The BSR will also respond to an ARP request for a network on a different interface when proxy ARP is turned on.

Group Access

ISP

Command Mode

Interface Configuration

Command Line Usage

ip proxy-arp no ip proxy-arp

Command Default

Disabled

2-32

MGBI

526363-001-00 Rev. B

Page 236
Image 236
Motorola BSR 2000 manual Ip proxy-arp no ip proxy-arp